Plasticizers

Main Page

UNIPLEX 552 is a solid plasticizer that can be formulated into adhesives intended for heat seal applications. It is approved by FDA under 21CFR 175.105.

UNIPLEX 552 is recommended for use in applications requiring higher heat activation temperatures that can be obtained with Uniplex 250 or Uniplex 260.

SPECIFICATIONS:

Appearance Off-white Crystalline Particles

(lumps or granules)

Acid No. (mg. KOH/gm.) 0.28 Maximum

Color (APHA, 1:1 in Xylene) 100 Maximum

Refractive Index (Molten 50° C) 1.569-1.572

PROPERTIES:

Molecular Weight (Theoretical) 552

Odor Mild, Characteristic

Empirical Formula C33H28O8

Melting Point, ° C 99 Min. (100-103 Typical

Bulk Density 34 lb./ft3

HANDLING INFORMATION:

Refer to Material Safety Data Sheet

These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any patents.

Plasticizers

Main Page