 Plasticizers |
Main Page |
UNIPLEX FRP-64
Poly(2,6-Dibromophenylene oxide)
CAS No. 69882-11-7
Description: A light tan melt-processable solid flame retardant containing 64% aromatic bromine. Resin systems compounded with Uniplex FRP-64P have high chemical and flame resistance, minimal thermal discoloration, and excellent light stability. The product is de-dusted with Uniplex 214 at 1.5 weight percent.
Applications:
Unfilled and Reinforced Thermoplastic Polyester (PBT and PET).
Unfilled and Reinforced Polyamide Resins (Nylon 6 and 66)
Typical Properties:
Bromine Content (%): 64 min.
Thermal Stability (5% Loss): 400° C
Iron Content (ppm, AA): 2 max.
Solubility (g/100g Solvent at 25° C):
Water: Insoluble
Acetone: Insoluble
Isopropanol: Insoluble
Xylene: Partially soluble
Tetrahydrofuran: >40
General Specifications:
Appearance: Light Tan Powder
Softening Range (DSC): 210-240° C
Sodium Bromide Content (%): 0.10 max.
Tribromophenol Content (% by GC): 0.15 max.
Loss on Drying (2 hr, 135° C): 1.0 max.
| Health & Safety: Refer to Material Safety Data Sheet (MSDS). |
These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. Suggestions for uses of our product should not be understood as recommendations that they be used in violation of any patents.