UNIPLEX FRP-64 P
Poly(2,6-Dibromophenylene oxide)
CAS No. 69882-11-7
Description:
A light tan melt-processable solid flame retardant containing 64%
aromatic bromine. Resin systems compounded with FRP-64P have
high chemical and flame resistance, minimal thermal discoloration,
and excellent light stability. The product is de-dusted with
Uniplex 214 at 1.5 weight percent.
Applications:
Unfilled and Reinforced Thermoplastic Polyester (PBT and PET)
Unfilled and Reinforced Polyamide Resins (Nylon 6 and 66)
Typical Properties:
Bromine Content (%)
64 min.
Thermal Stability (5% Loss)
2 max.
Solubility (g/100g Solvent at 25 C):
Acetone
Insoluble
Isopropanol
Insoluble
Xylene
Partially soluble
Tetrahydrofuran
>40
General Specifications:
Appearance
Light Tan Powder
Sodium Bromide Content (%)
210-240 C
Tribromophenol Content (% by GC)
0.15 max.
Loss on Drying (2 hr, 135 C)
1.0 max.
Health & Safety:
Refer to Material Safety Data Sheet (MSDS).
These suggestions and data are based on information we believe to be reliable. They are offered in good
faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We
recommend that the prospective user determine the suitability of our materials and suggestions before
adopting them on a commercial scale. Suggestions for uses of our product should not be understood as
recommendations that they be used in violation of any patents.
Uniplex FRP-64P
Date Issued: 6/19/09
www.unitexchemical.com
Page 1 of 1
Supersedes: 6/7/04
Iron Content (ppm, AA)
400 C
Water
Insoluble
Softening Range (DSC)
0.10 max.
