logo.jpg (21604 bytes)

UNIPLEX FP-760 D

Fluorochemical Greaseproof Agent for Paper and Paperboard

 

 

Overview        Uniplex FP-760 D is a FDA approved, water soluble fluorochemical agent that

                           imparts a high degree of oil and grease resistance to paper and paperboard.

                           It also imparts a sizing effect, and water resistance.  The addition of Uniplex

                           FP-760 D finish to paper and paperboard does not affect texture, color,

                           lubricity, air permeability or strength of the paper.

 

                           Uniplex FP-760 D can be applied by the size press, gravure or roll coating

                           methods, or as internal sizing.  Oil and Water resistance is obtained through

                           normal drying.  Curing at high temperature after drying is not necessary.

 

                           Uniplex FP-760 D is Non-Flammable, and does not contain or release ozone

                           depleting chlorofluorocarbons (CFC's), alkylphenol ethoxylates (APE's),

                           and does not release formaldehyde.

 

Typical         Classification……………………………Fluoroalkyl phosphate salt solution

Properties      Charge…………………………………..Anionic

                           Physical form……………………………Light tan liquid

                           Non-volatile (1 hr. @ 105°C, %)……….19.5 minimum

                           Specific Gravity (25°C)…………………1.1 ± 0.04

                           pH……………………………………….8.0 ± 1.5

                           Flash point………………………………None

                           Shipping…………………………………Non-Red Label

                           Storage…………………………………..Store at 32°F (0°C) to 100°F (38°C)

 

                           · Uniplex FP-760 D has no effect on hand, color, air permeability, or

                              strength of the paper.

                           · When using paper that has been sized with rosin and/or aluminum sulfate,

                              Uniplex FP-760 D should be used in conjunction with a rosin barrier.

                           · Uniplex FP-760 D may be safely applied to paper and fiberboard designed for

                              use as food packaging and wrapping.

                           · Uniplex FP-760 D complies to 21 CFR 176.170 as components in contact with

                              aqueous and fatty foods under conditions of use b through h of paragraph c

                              of section 176.170, Table 2.

 

 

 

 

 

 

 

 

 

Application                        Typical Formulation

                                    10% Isopropanol

                                    30% Polyvinyl Alcohol Solution (10% active in water)

                                    1.48% Uniplex FP-760 D 

                                    58.52 % Water

 

                                    Application Method:  Horizontal size press/roll coat

                                    Curing Method:  Convection drying at 225 - 250°F for 10 - 60 seconds

 

                                    PAPER TYPE                             % WET PICK-UP         KIT VALUE

                                    50# Natural Neutral Kraft                      77.6                                      4.6

                                    30# White Saturating Kraft                    66.0                                      4.8

 

Handling                 Refer to the Material Safety Data Sheet (MSDS) available for information on

Information           the safe use, handling and disposal of this product.

 

                                    The material should be stored in a location where it will not be exposed to                                      freezing temperature.

 

 

Important                             The seller makes no warranty, expressed or implied, concerning the accuracy

Notice to                               of any results to be obtained from the use of this information and no warranty

Purchaser                             expressed or implied concerning the use of these products other than

                                                indicated within.  The buyer assumes all risks of use and/or handling.  No

                                                statement is intended or should be construed as a recommendation to infringe

                                                any patent.