UNIPLEX FE-703

Fluorochemical Additive

Description: A solid fluorochemical polyester containing 46 % aliphatic

fluorine. This product is useful in improving water, alcohol, and oil

repellence of various vinyl polymeric systems. Resin systems

compounded with this product have high chemical flame resistance,

minimal thermal discoloration, and excellent light stability and

dielectric properties. The normal starting use level is 1800-4000 ppm

Fluorine to achieve the above mentioned properties.

Applications: Soil resistant PVC Resins for outdoor uses.

Medical applications (non-wovens) as an internal additive where resistance to alcohol, blood, and urine (low surface tensions fluids) is required. A short annealing time at 110°C is required for the fluorochemical additive to migrate to the surface.

Typical Properties:

Fluorine Content (%) 46 min.

Thermal Stability (5% Loss) 247C

Melting Range (C) 40-46

Flash Point (F) >450

General Specifications:

Appearance Light yellow solid

Ester Content (% by GC) 99 min.

Acidity (mg KOH/g) 4 max.

Water Content (%, Karl Fischer) 0.1 max.

Health & Safety: Refer to Material Safety Data Sheet (MSDS)

These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any patents.