UNIPLEX 270

DIMETHYLISOPHTHALATE

CAS NO. 1459-93-4

UNIPLEX 270 is a monomer for modifying the clarity and melting point of polyethylene terephthalate resins.

UNIPLEX 270 lowers the melting point of PET resins intended for use in films, blow-molded bottles and other applications as indicated by processing temperatures. The incorporation of UNIPLEX 270 into the polymer greatly increases the clarity of the finished products.

SPECIFICATIONS:

Appearance, Molten Clear Liquid

Odor Mild

Color, Molten, APHA 10 Maximum

Acid Value (mg KOH/gm) 0.1 Maximum

Melting Point 66°C Minimum

Assay 99% Minimum

Dimethyl Terephthalate, % 1.0 Maximum

Moisture 0.1% Maximum

HANDLING INFORMATION:

Refer to Material Safety Data Sheet

These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any patents.