UNIPLEX 250
DICYCLOHEXYL PHTHALATE
CAS NO. 84-61-7
UNIPLEX 250 is FDA approved under 21CFR 175.105, 21CFR 176.170, and 21CFR 177.1200.
UNIPLEX 250 is a heat activated plasticizer used in heat seal applications such as food wrappers,
food labels, pharmaceutical labels and other applications where a delayed heat activated adhesive
is required.
UNIPLEX 250 is used in printing ink formulations to improve adhesion and water resistance when
applied to paper, vinyl, textile and other substrates.
SPECIFICATIONS
:
Appearance White crystalline solid lumps or granules
Acidity (as phthalic acid) 0.01% Maximum
Color (APHA-1:1 isopropanol) 50 Maximum
Melting Point (°C)
63-65
Assay
99% Minimum
PROPERTIES:
Molecular Weight 330
Odor Essentially odorless @ 200°C
Specific Gravity (25°C) 1.29
Boiling Point (10 mm Hg °C) 231
Pour Point (°C)
60
Solubility in water
Practically insoluble
HANDLING INFORMATION
:
Refer to Material Safety Data Sheet
These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but
without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the
prospective user determine the suitability of our materials and suggestions before adopting them on a commercial
scale. Suggestions for uses of our products should not be understood as recommendations that they be used in
violation of any patents.
Uniplex 250
Date Issued: 6/18/09
www.unitexchemical.com
Page 1 of 1
Supersedes: 1/6/94
