UNIPLEX 250 (40 MICRON)
DICYCLOHEXYL PHTHALATE
CAS NO. 84-61-7
UNIPLEX 250 is FDA approved under 21CFR 175.105, 21CFR 176.170, and 21CFR
177.1200.
UNIPLEX 250 is a heat activated plasticizer used in heat seal applications such as food
wrappers, food labels, pharmaceutical labels and other applications where a delayed
heat activated adhesive is required.
UNIPLEX 250 is used in printing ink formulations to improve adhesion and water
resistance when applied to paper, vinyl, textile and other substrates.
SPECIFICATIONS
:
Appearance
Fine White Powdery Particles
Acidity (as phthalic acid)
0.01% Maximum
Color (APHA-1:1 isoproponol)
50 Maximum
Melting Point ( C)
63-65
Assay
99% Minimum
Particle size
40 Microns Maximum
PROPERTIES:
Molecular Weight
330
Odor
Moderate, characteristic
Specific Gravity (25 C)
1.29
Boiling Point (10 mm Hg C)
231
Pour Point ( C)
60
Solubility in water
Practically insoluble
Uniplex 250M
Date Issued: 6/05/09
www.unitexchemical.com
Page 1 of 2
Supersedes: 8/24/92
UNIPLEX 250 (40 MICRON)
HANDLING INFORMATION
:
Refer to Material Safety Data Sheet
These suggestions and data are based on information we believe to be reliable. They are offered in good
faith, but without guarantee, as conditions and methods of use of our products are beyond our control.
We recommend that the prospective user determine the suitability of our materials and suggestions before
adopting them on a commercial scale. Suggestions for uses of our products should not be understood as
recommendations that they be used in violation of any patents.
Uniplex 250M
Date Issued: 6/05/09
www.unitexchemical.com
Page 2 of 2
Supersedes: 8/24/92
