UNIPLEX 165
DIISOBUTYL ADIPATE
CAS NO. 141-04-8
Uniplex 165 is a safe, effective plasticizer for imparting low temperature flexibility to various
polymers, with a good balance of solvation and low temperature properties. It has excellent
compatibility with cellulose acetate butyrate, cellulose nitrate, vinyl acetate, vinyl chloride, and
vinyl chloride acetate.
Uniplex 165 is approved by the Food and Drug Administration for use under Code of Federal
Regulations 21 CFR 175. 105; 21 CFR 175 .300; and in other sections where incorporated by
reference.
Uniplex 165 is suggested as a solvent/plasticizer in fingernail enamel, nail enamel remover, hair
sprays, adhesives, and coatings. It is particularly recommended for plasticizing resinous and
polymeric coatings that are intended for direct contact with foodstuffs.
SPECIFICATIONS:
Appearance Clear liquid, no suspended material
Assay, as Diisobutyl Adipate 99.0 % minimum
Color (APHA) 25 maximum
Moisture, Karl Fischer 0.10% maximum
Specific Gravity, 25/25°C 0.946 - 0.953
HANDLING INFORMATION:
Refer to Material Safety Data Sheet
These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but
without guarantee, as conditions and methods of use of our products are beyond our control. We recommend that the
prospective user determine the suitability of our materials and suggestions before adopting them on a commercial
scale. Suggestions for uses of our products should not be understood as recommendations that they be used in
violation of any patents.
Uniplex 165
Date Issued: 6/22/09
www.unitexchemical.com
Page 1 of 1
Supersedes: 3/18/04
